Easyrig Vario 5 - Cinema 3 Vest

This rig is extremely useful, some might say essential, when using a gimbal. It allows you to operate for long periods of time without needing to put the rig down.

The Easyrig transfers the weight of the camera/ gimbal to your shoulders and back.

The vest can be equipped with our Flowcine Serene with extended Vario 5 Arm which stops the vertical bounce you get from using the Easyrig on its own. This allows you to run or walk with the rig without bouncing the rig up and down

Easyrig Vario 5 system

The Easyrig Vario 5 has an adjustable weight range from 5-17kg (11-38 lbs). By turning the adjustment screw located on the back, you can easily change the tension / power of the line.

16mm, 35mm & Digital cameras – It fits them all!

Flowcine Serene system

The Serene is a patent pending two axis spring arm that attaches at the end of the Easyrig (2/2.5/3 or Vario5) arm. It stabilises vibrations and motion errors on the vertical axis that comes from walking or running with the rig. It also stabilises side to side errors in the same scenarios by counter pivoting around it’s center axis. At the same time you have full use of the Easyrig cord extension that will allow you to go from high to low mode while at the same time the Serene will take care of the vertical and side to side stabilisation adding two more stabilised axis to your existing system.

The Serene can take camera setups between 6-19.5 kg, and you can easily fine tune the spring tension without tool. It works really well for other gimbal rigs like the ACR (BeSteady) gimbals, Freefly MoVI, DJI Ronin, Letus Helix and most other leading gimbal rigs.

Easyrig STABIL G2

Easyrig STABIL G2 suspended upper arm with adjustable arm 280mm/11in, 5-25 kg / 11-55 lbs. For years Easyrig users have been wanting something that smoothens out shots when walking. The Easyrig STABIL G2 is incorporated into the Easyrig system to make the weight distribution as even and ergonomic as possible. Stabil is the Swedish word for “Stable”.

In April of 2020 Easyrig upgraded the STABIL so it’s foldable, making it a lot easier to travel with.

They also upgraded the locking pin so it doesn’t jitter when locked in 90 degrees.

It now comes with a hanger, meaning that you can now hang the rig on a filmcart (or any other surface with an edge).

The STABIL G2 can stabilise camera setups between 5-25 kg / 11-55 lbs.

Easyrig Vario 5 system

Weight:

Cinema 3 vest and adjustable arm 5.2 kg (11 lbs)

Height: Mounted: 97 – 114 cm (38 – 45 in)

Folded: 60 cm (24 in)

Suspension line length 90 cm (35 in) when fully stretched.

Load range:

Standard 5-17 kg (11 – 38 lbs)

Hip belt sizes:

Medium M – XL 80cm (31in.) to 130cm (51in.)

Flowcine Serene system

Height 210mm

Width 405mm

Depth 68mm

Weight 1265g

Material Aluminium, Carbon Steel, Stainless Steel, EPDM rubber

Max load 19.5kg / 43lbs

Min load 6kg / 13lbs

Package dimensions 435 x 235 x 110mm

Package weight 2460g

Moon Shot Series – ‘Canada’

Sony F5, Zeiss CP2 prime lenses, Easyrig Vario 5 with Flowcine Serene Arm, ACR The Beast gimbal

dop: Franklin Dow

-You can skip to 06:32 to see the gimbal/ easyrig in action-